The armature of a two-pole dc generator has a total of 320 The armature of a two-pole dc generator has a total of 320 series turns. When operated at a speed of 1800r/min, the open-circuit generated voltage is 240 V. Calculate Фp, the air-gap flux per pole.
The dc machine of Problem 7.4 is to be operated The dc machine of Problem 7.4 is to be operated as a motor supplied by a constant armature terminal voltage of 250 V. If saturation effects are ignored, the magnetization curve of Figure becomes a straight line with a constant slope of 150 volts per […]
The dc generator of Problem 7.4 is to be operated at a The dc generator of Problem 7.4 is to be operated at a constant speed of 1200 r/min into a load resistance of 2.5O. a. Using the “spline ( )” function of MATLAB and the points of the magnetization curve of Figure at 0, […]
An electromechanical system in which electric energy storage An electromechanical system in which electric energy storage is in electric fields can be analyzed by techniques directly analogous to those derived in this chapter for magnetic field systems. Consider such a system in which it is possible to separate the loss mechanism mathematically from those of […]
a. Calculate the no-load speed and rotational loss. b. Assuming a. Calculate the no-load speed and rotational loss. b. Assuming the rotational loss to be constant, use MATLAB to plot the motor output power as a function of speed. Limit your plot to a maximum power output of 15 kW. c. Armature-voltage control is to […]
a. Calculate the rated armature current of this motor. What a. Calculate the rated armature current of this motor. What is the corresponding mechanical tor Figure shows in schematic form an electrostatic voltmeter, a capacitive system consisting of a fixed electrode and a moveable electrode. The moveable electrode is connected to a vane which rotates […]
a. Calculate the rated armature current of this motor. What a. Calculate the rated armature current of this motor. What is the corresponding mechanical torque in N 路 m? b. The current source supplies a current of 6.2 A to the motor armature, and the motor speed is measured to be 2670 r/min. Calculate the […]
A two-phase linear permanent-magnet synchronous motor has an air A two-phase linear permanent-magnet synchronous motor has an air-gap of length 1.0 mm, a wavelength of 12 cm, and a pole width of 4 cm. The rotor is 5 wavelengths in length. The permanent magnets on the rotor are arranged to produce an air-gap magnetic flux […]
a. Calculate the field current required to achieve operation a. Calculate the field current required to achieve operation at 15.2 N 路 m torque and 1800 r/min. Calculate the corresponding PWM duty cycle D. b. Calculate the field current required to achieve operation at 15.2 N 路 m torque and 1500 r/min. Calculate the corresponding […]
A voltage-source H-bridge inverter is used to produce the A voltage-source H-bridge inverter is used to produce the stepped waveform v (t) shown in Figure. For V0 = 50 V, T = 10 msec and D = 0.3: a. Using Fourier analysis, find the amplitude of the fundamental time harmonic component of v (t). b. […]